Home
Printer Parts
Summa Pneumatic Oscillating Tool

Summa Pneumatic Oscillating Tool

Price:

$5,990.00

SKU:

194536928

Brand:

Summa

Condition:

New

Weight:

11.00 LBS

Availability:

In Stock

Shipping:

Calculated at checkout

Product Description

Summa Pneumatic Oscillating Tool

The pneumatic oscillating tool is capable of cutting materials up to 25mm thick. It is suitable for cutting thick materials like honeycomb board, corrugated cardboard and foam boards, as well as some soft foams and rubbers.

The pneumatic oscillating tool (POT), powered by compressed air, moves the knife up and down over a stroke of 8mm with a maximum frequency of 150Hz. Materials up to 25mm thick can be cut. The robust construction of the tool makes it suitable for cutting thicker materials like honeycomb board, corrugated cardboard and foam boards. By adjusting the knife speeds, some soft foams and rubbers can also be cut.

Product Specification

Pneumatic Oscillator with Gliding Disk
1 Knife (20 x 0.65mm) with hex key
Pneumatic Kit, including Pneumatic Oil and Oil Mister
Installation Guide and Collar Wrench
Stroke: 8mm*
Frequency: 150Hz*
Compressed Air Requirements: 6bar & 78l/min.
It is advised that the compressor have 4-5 times the airflow capacity: +/- 360l/min

* The Stroke and Frequency may drop depending on the load on the tool.

Note: Air-compressor not included.

Compatibility

Cardboard:	Corrugated C Flute (4mm) Corrugated BC Flute (7mm) Honeycomb Board <= 10mm Honeycomb Board >= 10mm Reboard 10mm Reboard >= 10mm
Synthetic Materials:	Corrugated Plastic > 5mm
Composite Sandwich Board:	Foamboard with Paper > 5mm Foamboard with Plastic Foamboard with Aluminum
Special Materials:	Foam